ShoreTel IP 100 Specifications download pdf (Page 57)

Chapter 6: Configuring the SA-100 for Operation SA-100 Planning, Installation and Administration Guide

ShoreTel 12.1 57

Step 5 In the Enable HTTPS section, make sure that HTTPS is enabled. The function

is enabled when the first line in the says the following:

HTTPS is currently enabled on this service appliance.

If the service appliance is disabled, do the following:

Step a In the Enable HTTPS on the following Service Appliance field, select the

option that indicates the device on which you want to enable HTTPS.

Note Selecting All enables HTTPS only on the SA-100s that are currently

online. The enabling process must be repeated when units that are

currently offline are brought online and when new units are added.

Step b Click Go to enable HTTPS.

NOTE When using a self-signed certificate, user uploads to Personal or Shared Library

may fail if using the FireFox web browser to access the Conference Web Portal.

NOTE User’s who access the Conference Web Portal on appliances with HTTPS enabled

and who use the FireFox web browser must disable Transport Layer Security (TLS)

to properly render web pages. To disable TLS in Firefox:

— Select Tools > Options.

— Click the Advanced tab

— Click the Encryption tab.

— Uncheck "Use TLS 1.0".

— Click OK.

6.5 Creating SA-100 Users

Anyone can participate in or initiate ad hoc SA-100-managed conference calls. However,

the SA-100 users referred to here are ShoreTel system users who are granted accounts that

allow them to schedule and host conferences on SA-100s. For information about

configuring users, refer to the ShoreTel 12.1: System Administration Guide. To configure

these SA-100 users, do the following:

Step 1 Launch ShoreWare Director.

Step 2 Click Administration > Users > Individual Users. The Individual Users page

appears.

Step 3 Select the user for whom you want to enable the service. The Users page

containing the profile of the user you select appears.

Step 4 Scroll down to Conference Setting section near the bottom of the page.

Step 5 In the Appliance field, select the SA-100 that you want the user to use for

conference calls.

Step 6 Click Save.

NOTE If you are not running proxy services on your network, we recommend that you

disable the Microsoft Internet Explorer Internet Option setting “Automatically

detect settings” on the machines of conference users. This setting can cause the

Windows Presenter on user machines using a WiFi connection to take up to 30

seconds to load during conferences.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 81 82

No comments

ShoreTel IP 100 Specifications Page 57